UNILAB Joulemeter And Wattmeter
UNILAB Joulemeter And Wattmeter
Product code: CP00057817
Product Description
The unit is ideal for accurate measurement of either cumulative electrical energy delivered to a load from a power supply, or instantaneous power. A range of experiments are possible from simple investigations into specific heat capacity to measurement of energy stored in LCR Circuits.
The device can accept AC and DC power with a maximum of 25V DC & 15V AC and a maximum capacity of 10A. The device has two ranges one for Joules & Watts and the other for mJ & mW. The device should be used in the J & W setting unless the correct setup is in place for mJ & mW as a maximum of 10mA is the limit for this mode.
Features:
- Display: 4-digit, LED display
- Input: 24V DC max or 15V rms AC max.
- Capacity: 10A max or 10mA in mJ/mW mode
- Power: Mains unit with 1.8m of 3-core cable, illuminated ON/OFF Switch & 1A fuse.
- 4-digit LED display of either energy delivered or power supplied
- Dimensions:
- Width: 175mm
- Height: 100mm
- Length: 160mm
- An instruction manual of experiments is included
- This device is compliant to EN61010-2010 with certificates available on request
- Measures AC & DC power
- Key Stage 3 Physics - Energy: Comparing power ratings of appliances in watts (W, kW).
- Key Stage 4 Physics - Electricity: Power transfer related to p.d. and current, or current and resistance
- Key Stage 4 Physics - Energy: Power as the rate of transfer of energy.
- Key Stage 4 Physics - Structure of Matter: Calculating energy changes involved on heating, using specific heat capacity; and those involved in changes of state, using specific latent heat.
- Ensure the circuit is set up correctly before use and only use the mJ/mW setting if confident the current is low enough.
The unit is ideal for accurate measurement of either cumulative electrical energy delivered to a load from a power supply, or instantaneous power. A range of experiments are possible from simple investigations into specific heat capacity to measurement of energy stored in LCR Circuits.
The device can accept AC and DC power with a maximum of 25V DC & 15V AC and a maximum capacity of 10A. The device has two ranges one for Joules & Watts and the other for mJ & mW. The device should be used in the J & W setting unless the correct setup is in place for mJ & mW as a maximum of 10mA is the limit for this mode.
Features:
- Display: 4-digit, LED display
- Input: 24V DC max or 15V rms AC max.
- Capacity: 10A max or 10mA in mJ/mW mode
- Power: Mains unit with 1.8m of 3-core cable, illuminated ON/OFF Switch & 1A fuse.
- 4-digit LED display of either energy delivered or power supplied
- Dimensions:
- Width: 175mm
- Height: 100mm
- Length: 160mm
- An instruction manual of experiments is included
- This device is compliant to EN61010-2010 with certificates available on request
- Measures AC & DC power
- Key Stage 3 Physics - Energy: Comparing power ratings of appliances in watts (W, kW).
- Key Stage 4 Physics - Electricity: Power transfer related to p.d. and current, or current and resistance
- Key Stage 4 Physics - Energy: Power as the rate of transfer of energy.
- Key Stage 4 Physics - Structure of Matter: Calculating energy changes involved on heating, using specific heat capacity; and those involved in changes of state, using specific latent heat.
- Ensure the circuit is set up correctly before use and only use the mJ/mW setting if confident the current is low enough.
