Bell in a Bell Jar Experiment KIT
Bell in a Bell Jar Experiment KIT
Product code: E8L11149
Product Description
An ideal solution to the common physics experiment demonstrating that sound will not travel in a vacuum.
Place the bell jar on the pump plate, briefly connect the power supply so that the bell can be heard ringing. Connect a vacuum pump to the pump plate and evacuate as much air as possible. Close the valve, switch off the pump and connect the power again. The bell striker moves but can barely be heard. Open the valve slowly, allowing air back in, and the volume of the bell increases.
Please note - Vacuum pump and DC Power Supply are not included. See PP00057619 and B8R02971.
The apparatus consists of a sturdy metal base plate mounted on a metal tripod.
Baseplate dimensions:
- Height: 200mm
- Diameter: 230mm
The bell jar is acrylic and comes complete with an electric bell that requires a suitable d.c. power supply (3 - 6V). Connection to a power supply is made via two 4mm terminals that protrude from the rubber stopper positioned at the top of the bell jar.
Bell jar dimensions:
- Height: 260mm
- Diameter: 180mm
- Overall mass: 5kg
- Clear demonstration of the fact that sound doesn't travel in a vacuum.
- Key Stage 3 Physics - Waves: Sound needs a medium to travel, the speed of sound in air, in water, in solids.
- Key Stage 4 Physics - Forces and Motion: Explain why the work done in the compression or expansion of gases is the product of the pressure and the change in volume.
- Limiting a Power Supply will prevent accidental overload of the electric bell. The UNILAB Lockmaster Power Unit is ideal (see PP00057619).
Further Information
- Age Recommended from
- 11 Years
- Bell Voltage Requirements
- 3 - 6V DC
- Brand
- Unbranded
- Demonstration Units
- Sound in a Vacuum
- Product Type
- Bell in a Bell Jar
An ideal solution to the common physics experiment demonstrating that sound will not travel in a vacuum.
Place the bell jar on the pump plate, briefly connect the power supply so that the bell can be heard ringing. Connect a vacuum pump to the pump plate and evacuate as much air as possible. Close the valve, switch off the pump and connect the power again. The bell striker moves but can barely be heard. Open the valve slowly, allowing air back in, and the volume of the bell increases.
Please note - Vacuum pump and DC Power Supply are not included. See PP00057619 and B8R02971.
The apparatus consists of a sturdy metal base plate mounted on a metal tripod.
Baseplate dimensions:
- Height: 200mm
- Diameter: 230mm
The bell jar is acrylic and comes complete with an electric bell that requires a suitable d.c. power supply (3 - 6V). Connection to a power supply is made via two 4mm terminals that protrude from the rubber stopper positioned at the top of the bell jar.
Bell jar dimensions:
- Height: 260mm
- Diameter: 180mm
- Overall mass: 5kg
- Clear demonstration of the fact that sound doesn't travel in a vacuum.
- Key Stage 3 Physics - Waves: Sound needs a medium to travel, the speed of sound in air, in water, in solids.
- Key Stage 4 Physics - Forces and Motion: Explain why the work done in the compression or expansion of gases is the product of the pressure and the change in volume.
- Limiting a Power Supply will prevent accidental overload of the electric bell. The UNILAB Lockmaster Power Unit is ideal (see PP00057619).
Further Information
- Age Recommended from
- 11 Years
- Bell Voltage Requirements
- 3 - 6V DC
- Brand
- Unbranded
- Demonstration Units
- Sound in a Vacuum
- Product Type
- Bell in a Bell Jar
