The BenchVent BV200H-D A2 ducted hood mounted extraction cabinet is a general purpose workstation for light aerosol spray and airbrush use. It is designed to capture dust and eliminate fumes/vapours for a safer working environment that meets the CoSHH regulations.

The workstation hood also accommodates prototypes, models, ceramic parts, PCBs etc, placed onto the hood base to be sprayed, soldered, cleaned, glued, moulded or sanded etc. This unit is designed for immediate operator protection whereby 'large' particulates (5 microns) are filtered out and 'fine' particulates (5 microns) together with odours, gases, vapours and fumes within the hood enclosure are exhausted to atmosphere via the flexi-duct.

What's included in the BV200H-D?

• Filter unit with fan(s)
• Hood Enclosure
• 1 x Particulate filter
• Power Lead
• Data/Warranty Booklet

Application includes filtration of:

• Aerosol adhesives (glue booth for Spray Mount)
• Aerosol lacquers and fixatives
• Airbrush sprays applied to artwork up to A1 size. A2 or A1 drawing boards can be placed into the hoods at an angle for efficient overspray capture.

Key Features:

• 355m³/hr air volume suitable for a wide range of extraction applications
• Built with a centrifugal blower via a three stage graduated fibre particulate filter complete with a high particle holding capacity, ensuring long filter life
• Carry handle to aid with portability

All BenchVent filtration and extraction systems carry a lifetime guarantee, are quiet in operation and can be assembled in seconds. Place onto a desk, bench or trolley and then simply plug in and switch on. For artwork applications, standard A2 drawing boards can be placed within the hood enclosure.

The boards fit at an angle for efficient over-spray capture. 3D items, models, printed circuit boards etc. may be placed onto the hood base for spraying, cleaning, sanding, gluing etc. The Flexi-duct can be fixed to a standard domestic vent or simply placed through a partially open window to facilitate portability or convenience.